8
2.2
RDUA008FB
Table 5
RDUA008FB specifications.
Specification
Details
Dimensions (H x W x D)
164 cm x 95 cm x 75 cm; 64.5 in. x 37.3 in. x 29.5 in.
Control box, frame, & motor enclosure
material
304L Stainless Steel
Control box and frame surface finish
At least 35 µin. Ra / 0.89 µm Ra
Control box and motor enclosure ingress
rating
IP 65, NEMA 4X
Voltage
100-230 VAC, 50/60 Hz
Input Wattage
Less than 150 W
Amperage
100 V 1.6 A; 110 V 1.5 A ; 230 V 0.7 A
Voltage fluctuation
± 10%
Altitude rating
1000 m (3280 ft)
Maximum humidity
85%, avoid condensation
Ambient temperature
4-40 °C (39-104 °F)
Motor horsepower
1/8 hp
Power cord length
600 cm (20 ft)
Power cord plug options
US, Continental Europe, Swiss, Australia, Japan, UK
E-stop (present, yes/no, location)
Yes, face of control box
Minimum and maximum speed
0 to 250 RPM
Connections for remote output/control
TURCK RSFPV61, RSFPV579
Functions available from remote control
panel
Motor
–
start, stop. Speed
–
adjustment, indication. Alarm
–
indication. Mode of control
(remote/local)
–
indication
Signal type(s) for remote output/control
Wand speed out 4-20 mA, motor control in 0-10 VDC,
discrete I/O signals relay contact type
Alarms generated
Motor failure, speed off-range failure, E-stop activation
Method for RPM measurement
Direct measurement of motor shaft speed
Casters
4X swivel with brakes
Wheel material
Nylon
Recipe storage
Yes. Up to 10 can be stored. Up to ten instructions in each recipe are executed
sequentially. Each instruction contains individual programmable parameters: mixing
time, pause time, and speed.
Password protection
Operator level: access to protected function
–
start recipe run.
Supervisor level: access to protected functions
–
Recipe Editor, Pause or Abort Recipe
run, Switch of Control between Local to Remote, adjustment of set up for reduced set
of parameters.
Maintenance level: access to protected functions
–
Program Setup parameters,
System parameters and includes Supervisor level of access.
