6
1.3
Safety Messages
Prior to operating the product all instructions and safety messages must be read
.
Safety is the responsibility of the individual installing, using or maintaining the equipment and any others who
may be involved in the operation. It is important that the safety instructions are read and followed.
Table 3
Safety messages.
Symbol
Safety Messages
W AR NING! M ay lead to severe injuries or death.
- Do not use this instrument in any manner inconsistent with these operating instructions or under any
conditions that exceed the environmental specifications stated.
- Do not attempt to service or reposition the drive unit while shaft/shaft adapt or is rotating.
- Do not attempt to open or repair the drive. Removal or destruction of the housing voids any warranty,
explicit or implied. Consult the manufacturer or distributor for qualified technical service assistance.
- Do not use flammable liquids / substances.
- Do not use non-Pall rotational wands or heavy-duty frames.
Do no t
- Submerge drive unit in water
- Cut ground plug
- Disconnect the protective earth connector
- Do not allow loose clothing or parts of the body to come near the rotating drive unit shaft/shaft adaptor.
- Power supplied to this instrument must match the specifications indicated on the control box.
- Prior to servicing the drive unit, always turn the power off using the ON/OFF switch on the front of the unit.
Unplug and remove power cord to avoid tangling or breaking.
- For full compliance with CE specifications, be sure the appropriate ground connection is made
- Mains outlet used to power the equipment must be within 3 meters of the device and easily accessible
- Hold equipment by the frame and not by the motor or motor positioner. Lifting may require more than one
person
- Only Pall rotational wands and heavy-duty frames are to be used.
- Disconnect all power before servicing.
