23
13.2
Loading a Recipe
To load a recipe, follow these steps:
1.
On the Automatic Mode scene, press Select. The Recipe Selector screen will open.
2.
Use the buttons on the Recipe Selector screen to load recipes and view their contents.
3.
At the top of the screen, press the arrow buttons to move through the list of recipes.
4.
In the lower right corner of the screen, press the Back and Ne xt buttons to move through the individual
instructions in the selected recipe.
5.
On the Recipe Selector screen, press the back button
in the upper right corner of the screen to load the
selected recipe and return to the Automatic Mode screen.
13.3
Running a Recipe
To run the recipe listed on the Automatic Mode screen, press and hold the Start button. The mixer will start
according to the recipe’s instructions and “
Routine in Progress
”
will appear in the menu bar. The time remaining in
the recipe is listed at the bottom of the screen.
The window status bar will show a
blinking “Routine in Progress”.
Upon finishing the recipe run the screen will show
“Successful Finish” with
a time stamp, run duration and name
of the recipe finished. To resume to the Auto Mode screen press the OK button.
When failure mode is activated during a recipe run the job is paused automatically and can be resumed upon
failure reset. “Unscheduled Finish” is displayed with
a time stamp, run duration and name of the recipe after
finishing the recipe run. To resume to the Auto Mode screen press the OK button.
13.4
Aborting a Recipe
Supervisor and Maintenance user levels can abort running recipes. To abort a recipe that is currently running,
press and hold the Abort button. When a routine is aborted
the “Unscheduled Finish” screen with
a time stamp,
name of the recipe aborted and run duration will open. To resume to the Manual Mode screen, press the OK
button.
13.5
Pausing and Resuming a Recipe
Supervisor and Maintenance user levels can pause and resume recipes. To a recipe that is currently running, press
and hold the Pause button. A b
linking “Routine Paused” status is displayed in
the status bar. To resume the recipe
from where it was paused, press and hold the Resume button.
13.6
Editing a Recipe
Supervisor and maintenance user levels
can edit a recipe’s instructions. To edit a recipe, follow these steps:
1.
Press Se lect on the Automatic Mode screen. The Recipe Selector screen opens.
2.
Use the arrow buttons at the top of the screen to scroll through the list of recipes until you open the one you
want to edit.
3.
Press Edit. The Recipe Editor screen opens.
4.
If needed, press the Back and Ne xt buttons on the right side of the screen to scroll through the list of
instructions for that recipe.
5.
Each recipe can contain up to 10 instructions.
6.
Set the parameters to use for a specific instruction.
