Palfinger PC 3800, Руководство по эксплуатации

Страница: 51 / 158

Chapter 5 Safety equipment
Set the crane to emergency mode.
Remove the cover of the control box.
Crane with PTO (power-take-
off)
Equipped with power pack
(electric motor):
For sending the external signal
to the power pack it is
necessary to press also button
B in addition to the procedure
described below.
1. Remove the seal from the override button A.
2. Press the override button to its stop.
3. Turn it counter-clockwise by 180°.
4. Then let the override button go.
The crane is now in emergency mode.
Moving the crane into transport position in emergency mode:
Operate the crane from the emergency operator station.
•
If a load has been raised, put it down without increasing the load moment.
•
To put down the load you may perform only those crane movements that reduce the load moment.
Before starting to operate the crane, familiarize with the arrangement of the control symbols on the
emergency operator station.
Keep a safe distance away from all moving parts of the crane and the load (see 'Minimum distances'
Chapter 2).
•
After having put down the load move the crane in transport position (refer to 'Moving the crane in
transport position' in chapter 9).
Continuing to work is not permitted!
•
Contact a PALFINGER partner immediately to get the crane repaired.
45