Palfinger PC 3800, Руководство по эксплуатации

Страница: 117 / 158

Chapter 10 Maintenance
Lubrication
Danger!
Unintended crane movement during lubrication creates an
acute risk of fatality for the operator and others.
Therefore turn off the crane every time before lubricating.
Grease nipples must take grease easily. Replace any damaged or seized grease nipples. If it is
impossible to press in grease even after replacing the nipple, contact your PALFINGER partner.
Lubricating:
Warning!
Dirt in the bearing may cause damage to the unit and
increase repair cost and downtime.
•
Remove all old, dirty grease and other contamination from the lubricating point. Otherwise dirt in
old grease will be pressed into the bearing point.
•
Press the grease into the bearing point.
•
Move the components. This distributes the grease in the bearing.
•
Press more grease into the grease nipple.
•
Repeat this until fresh grease begins to come out of the bearing point.
Warning!
Excess grease at lubricating points and bearing points
increase the risk of accident and are a danger to the environment.
•
After lubricating remove any excess grease.
•
Do not use excess grease again.
•
Dispose of excess grease in accordance with the applicable national legislation!
Grease all lubricating points on the unit.
Rope grease
Warning!
Sticking out strands can cause severe hand injuries when you
lubricate the load rope.
Therefore always wear appropriate gloves when lubricating the load rope.
111