Palfinger ILSL 33/44 Скачать руководство пользователя

Страница: 33 / 42

ILSL 33/44 Owner‘s Manual

Rev.1.1

7.4

Cross Test on Single Pole Plug Charge System

Testing of full system using a battery load tester. Start with testing each individual battery on both tractor

and trailer before proceeding to check the system:

A. 12V lead from tractor coil cord
B. Center (+) plug on front of trailer
C. Trailer Ground on front of trailer
D. Tractor chassis ground

+ - + -

1. Tractor Test:

•

Ground battery load tester on tractor chassis point (D)

•

Connect positive load tester cable on positive pole of single pole plug at end of tractor coil

cord (A)

•

Run load test- This will test entire circuit on tractor including ground

2. Trailer Test:

•

Ground battery load tester on trailer chassis point (C)

•

Connect positive cable on positive pole of single pole plug receptacle on trailer (B).

•

Run load test- This will test entire circuit on tractor including circuit breakers and ground

between trailer batteries and trailer chassis.

3. Tractor and Trailer Charging system test while connected:

•

Ground battery load tester on tractor chassis point (D)

•

Connect positive cable on positive pole of single pole plug receptacle on trailer (B).

•

Run load test- This will test entire circuit on tractor and trailer including ground between

tractor, trailer, and circuit breaker on trailer.

A simple low amp voltage test at the front of the trailer or at the tractor will not show insufficient connections

or ground problems.

Содержание ILSL 33/44











































Результаты поиска

Содержание ILSL 33/44

Отзывы:

Похожие инструкции для ILSL 33/44

Бренды по названию

Популярные бренды

Palfinger ILSL 33/44, Руководство пользователя

Результаты поиска

Содержание ILSL 33/44

Отзывы:

Похожие инструкции для ILSL 33/44

Бренды по названию

Популярные бренды