36
004778300 14/09/2020
It is prohibited to use the appliance as
an incinerator to burn rubbish.
3.2 pellet storage
Pellets must be kept in a dry place, not
too cold and the bags must be kept
sealed.
It is advisable to keep a number of bags of pellets
in the room where the appliance is being used or
in an adjacent room provided it is at the correct
temperature and humidity and at a safe distance
(at least one meter) away from heat sources.
Wet and/or cold pellets (5 °C) reduce the thermal
potential of the fuel resulting in the need for more
cleaning maintenance of the brazier (unburned
material) and of the fireplace.
Pay particular attention to the stor-
age and handling of pellet bags. Their
crushing and the formation of sawdust
must be avoided.
If sawdust is placed in the appliance tank it could
cause the pellet loading system to block.
The use of poor quality pellets can compromise
the normal functioning of the appliance and lead
to losing the guarantee.
4 HANDLING AND
TRANSpORTATION
The appliance is delivered complete with all the
parts required.
Pay attention to the tendency for the appliance
to become unbalanced.
The centre of gravity of the appliance is carried
towards the front.
Bear in mind the above also when moving the
appliance on the transport stand. It is advisable
to unpack the appliance only when it has arrived
at the installation site.
It is absolutely necessary to move and
unpack the appliance with suitable
means and check the compatibility of
the room in which it is to be installed.
Make sure that children do not play with the pack
aging components (e.g. films and polystyrene):
Danger of suffocation!
During moving, lifting, and unpacking of the
appliance the following is absolutely necessary:
• always keep it in an upright position;
• never tip it over into a horizontal position;
• never tilt it on the front to avoid breaking the
glass of the firebox door.
4.1 Removal from the transport pallet
To remove the appliance from the transport
pallet, follow the instructions given in the at
tached "Product Booklet".
Dismantling and disposal of materials may also
be entrusted to third parties, provided that com
panies who are authorised to recover and dispose
of the materials in question are always used.
Always follow the regulations in force in the
country in which the appliance is being used for
disposal of materials and possibly for the disposal
report.
Fig. 3
