21
Palax D410 Pro+
Translation
1-2020
Operation of the Joystick C
Figure 11
In-feed conveyor forward (feeding), direction 1
In-feed conveyor backward (reversing), direction 2
Crosscut movement, direction 3
Lifting the crosscut saw-bar and automatic launch of the splitting operation, direction 4
Cutting to equal length and feeding into the splitting chute
Cut off the undersized piece while there is still sufficiently material for two or three more
pieces of appropriate size left in the billet. The last log must not be longer than the adjusted
cut-off length.
Use the scale at the edge of the in-feed deck as an aid.
Feeding the last log for splitting
Once the pusher has returned to its rear position, feed the last log into the splitting chute the
normal way.
Start the splitting operation manually.
WARNING! Make sure that the tree will remain under the clamp throughout the
cutting operation. The log must not be shorter than 25 cm.
Figure 12
