Palax COMBI M, Инструкция по эксплуатации

Страница: 27 / 31

Ohjekirja Palax combi M 2004.1 En
27
3 6
A
B
C
Sideways adjustment of the belt, upper end
You can let the machine run, though exercising caution, when carrying out the sideways
adjustment of the belt. This way the adjustment is much easier to perform.
‰
If the belt is running at the right edge, shift the right end of the upper roller outward.
‰
If the belt is running at the left edge, shift the left end of the upper roller outward.
Sideways adjustment of the belt, lower end, Figure 36
‰
The roller at the lower end of the conveyor
can be adjusted by means of adjustment
screw B on the right-hand side bearing of
the lower roller.
‰
If the belt is running at the right edge,
loosen slightly the attachment bolts A (13
mm spanner) of the bearing on the right-
hand side and screw in the adjustment B
(17 mm spanner). If the belt is running at
the left edge, then turn the screw outward.
‰
Check the course of the belt and tighten the screws.
‰
It is best to carry out the adjustment, though exercising caution, when the belt is
rotating at low speed.
7.7 Cleaning the conveyor
‰
Keep the conveyor free of debris to ensure its trouble-free operation.
‰
A particular debris scraper C (Figure 36) in front of the drive roller at the lower end,
prevents the debris from falling between the roller and the belt.
‰
The debris scraper should be cleaned as necessary.
‰
Especially in wintertime, it is important that the conveyor is always cleaned at the end
of every working session.
‰
The conveyor can also be washed with a high-pressure cleaner.
6.8 Washing the machine
‰
Wash the machine occasionally with a high-pressure cleaner. This is especially
important if the machine is left standing for a longer period of time. Lubricate the
machine after washing.
Note! Do not direct the water jet onto electric devices or bearings.
7.9 Storing the machine.
‰
The machine is intended for outdoor use but it is recommended to keep it under cover
for longer standstills to avoid corrosion and malfunctions.
‰
If a machine powered by a diesel engine is left standing for several months, the battery
should be removed and regularly recharged. Also check the battery fluid level and top
up as necessary.