Palax COMBI M, Инструкция по эксплуатации

Страница: 10 / 31

Ohjekirja Palax combi M 2004.1 En
10
1.8 Operating conditions
‰
Never use the machine indoors because of the risk of dust creation and the danger of
exhaust gases.
‰
Only operate the machine in an adequately lit space.
‰
Make sure that no other people, especially children, are present inside the operating
range.
‰
It is recommended that a suitable stand be purchased or made that enables the trees
to be processed where the logs are ready at the level of the in-feed deck. Hence,
unnecessary lifting may be avoided and the work can proceed much faster.
‰
Always place the machine on as level a surface as possible.
‰
The most suitable temperature range for operation is approximately - 20 to +30
degrees Centigrade. Otherwise, the weather conditions do not set any restrictions on
the operation.
‰
When starting the machine in severe frost, allow it first to idle at about 1/4 of the
maximum speed for about 5 to 10 minutes. This way, the oil warms up and flows better,
so risk of damage to the seals is reduced.
1.9 Machine configurations
PALAX COMBI M –TR P.T.O drive, for three-point hitch
PALAX COMBI M -TR/SM P.T.O drive/electric motor, 7,5 kW, for
three-point hitch
PALAX COMBI M -TR/SM+ MOBIL B P.T.O drive/electric motor, 7,5 kW,
single axle with brakes for trailing at
80 km/h
PALAX COMBI M -Honda GASOLINE
13 Hp Petrol engine, Honda type GX 390,
10 kW
PALAX COMBI M – GASOLINE 13
Hp + MOBIL A Single axle platform without brakes
for trailing at 80 km/h
+ MOBIL B Single axle platform with brakes for
trailing at 80 km/h
PALAX COMBI M - DIESEL 15 Hp Diesel engine, Lombardini type 7 LD
665, 11 kW
+ MOBIL B Single axle platform with brakes for
trailing at 80 km/h
PALAX belt conveyor of 3,5 m with manual winch
PALAX belt conveyor of 4,5 m with manual winch
1.10 Terms of warranty
The warranty period runs for 12 months from the date of purchase.
The warranty covers
‰
Parts which have been damaged during normal operation of the machine due to any
defects in material or workmanship.
‰
The reasonable repair cost as set forth in the agreement between the buyer and the
manufacturer.
‰
A new part delivered to replace a defective one.