Palas VKL 10 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 32

Palas VKL 10 Скачать руководство пользователя страница 30

O

PERATION

M

ANUAL

VKL

10

/100

V

ERSION

V005-06-2020

30

12. Spare parts list / accessories list

The following options are available as accessories:

•

Transport case for up to three VKL dilution systems

•

Compressed air supply adapter

The following replacement parts are available:

•

Connecting piece of the exhaust air

•

Suction nozzle

•

Absolute filter

•

Inlet nozzle for model VKL 10

•

Inlet nozzle for model VKL 100

•

Inlet nozzle for model version VKL 10 E

•

Inlet nozzle for model VKL 27

13

Transport, packaging and storage

13.1 Packaging:

Please keep the original packaging, so that if it should become necessary (for service or
recalibration) you can use this packaging to send the unit back to Palas®.

13.2 Storage:

If the unit will not be used for a longer period, the instrument should be cleaned. Then the
unit should be stored in a dry location.

13.3 Transport:

When transporting by hand take care about the weight. Please see also technical parameter.

For all other types of transport (such as shipping), the unit must first cleaned and the
instrument should be packed safty for transportation. Please use the original transport
packaging.

«
...
28
29
30
31
32
»

Содержание VKL 10

































Отзывы:

Нет отзывов