9
PZ Series 150-250-500-1000 Shaker Cleaner
Operation
Start
Press START button.
Fan contactor M1 is energized, timer module sets,
and the fan motor starts. Average operating period
for fan is 4 hours.
Clean
Press CLEAN button.
Fan contactor M1 is de-energized and the timer is
energized.
After approximately 75-seconds, the shaker motor
contactor M2 is energized and the shaker motor runs
for approximately 30-seconds.
Typical Wiring Diagram, Three-Phase Power Supply
Shaker motor contactor is de-energized and the
timer resumes inactive status.
Note: Before a cleaning cycle can start by
pressing the CLEAN button, the M1 fan
contactor must have been energized for at
least 30-seconds.
In the event of a power supply failure during a cycle,
an internal safety feature ensures the controller
automatically resets ready for the fan to be restarted.
Reapplying power does not require the cycle to be
completed.
