WAP-O3G User Manual
46
9.
Appendix A – Specifications WAP
Standards
IEEE802.11b/g, IEEE802.3, IEEE802.3u, IEEE802.3af, IEEE802.1f, IEEE802.1x
Data Rates and Frequency Band
IEEE 802.11b-
DSSS 11, 5.5, 2, 1 Mbps (auto fallback)
IEEE 802.11g-
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps (auto fallback), Modulation- DBPSK @ 1Mbps,
DQPSK @2Mbps, CCK @ 5.5 & 11Mbps, BPSK @ 6 and 9 Mbps, QPSK @ 12 and 18 Mbps, 16-QAM @ 24 and
36 Mbps, 64-QAM @ 48 and 54 Mbps
RF Information
Frequency Band- 802.11b/g:
U.S., Europe and Japan product covering 2.4 to 2.484 GHz, programmable for different country regulations.
Operating Channels- 11 for North America, 14 for Japan, 13 for Europe.
Receive Sensitivity (Typical)-
2.412~2.472G(IEEE802.11g)-
Up to -91dBm
2.412~2.472G(IEEE802.11b)-
Up to -90dBm
Available Transmit Power (Typical)
2.412~2.472G (IEEE802.11g),
Up to 28dBm
2.412~2.472G (IEEE802.11b),
Up to 28dBm
Power Requirements
Ethernet POE in: 36~57VDC for IEEE 802.3af compliant
Operations
Up to Four Multiple SSID
Supports 802.1Q VLANs
Access Point Mode
Bridge Mode
Repeater Mode
WDS Mode
Management and Security
Remote mangement via HTTP, SNMP V1, and Telnet
Security- IEEE802.1x Authenticator / RADIUS Client (EAP-MD5/TLS/TTLS) Support in AP Mode; WPA/WPA2
supplicant support in Client Bridge mode; WPA2/WPA / Pre-share Key (PSK)/ AES/TKIP
MAC address filtering (AP mode)
Layer 2 Isolation
Hide SSID in beacons
IP Auto-configuration- DHCP client/server
Firmware upgrade via HTTP
QoS- WMM
Mechanical
Dimensions
- 11” x 9.5” x 2.75” L x W x D
Weight
- 5 lbs.
Housing
- Die-cast heat finned Aluminum housing
Antenna
- 2x N type Female Connector
Interface
- One 10/100Mbps RJ-45 LAN or LAN/PoE Port
Environmental
Temperature Range
-
Operating: -10°C to 50°C (14°F to 132°F)
Storage: -40°Cto 70°C (-40°F to 158°F)
Humidity
- 5%~95% Typical