WAP-O3G User Manual
32
Scan
: Click
Scan
to perform an automatic site survey. A new window displays
the results of the site survey. (See the figure below.) The WAP-O3G scans the
2.4GHz frequency for devices currently broadcasting their SSIDs, and
displays
them in the 2.4GHz Site Survey table shown below.
In the table, click the
BSSID
of the Access Point you wish to connect to.
Click
Refresh
to re-scan the frequency
Prefer BSSID:
If you want the WAP-O3G to associate based on MAC Address
instead of SSID, select the
Prefer BSSID
checkbox.
WDS Client:
Click
Enable
if you want the O3G to act as a WDS client.
4.2.1.2.
Wireless Security
In the WAP-O3G main menu, in the Wireless section, click Wireless Security. The
Wireless Security page appears where you can disable security or enable secure
encryption. Wireless Security is disabled by default.
4.2.1.3.
WEP
When you choose a security mode as described above, the Wireless Security page
displays options for the chosen security mode.
Security
Mode
: If your wireless network uses WEP encryption, select
WEP
from
the drop-down list. The Wireless Security page displays options for WEP
encryption.
