Pail Mate Sprayer Users’ Manual
Product Overview
This product is designed and manufactured in the USA. It uses the best available components
and will provide dependable service for years in the professional and DIY environments
provided it is thoroughly cleaned after use.
The Pail Mate Sprayer is designed primarily for use with water-based application chemicals.
See the list of supported chemicals on page 9
.
This product was specifically designed to
respond to the increasing environmental requirements driving the demand for the shift from
oil and solvent based application chemicals to water based products. Product features
include:
A professional, ergonomic, no drip cast Zinc spray handle with an adjustable handle
permitting the delivery of up to 1.0 gallon of chemical per minute.
A 25” curved spray wand which permits spraying while maintaining good back friendly
posture.
A 25’ long non-marking, non-scuffing spray hose is standard. Optional add on lengths
allow longer working range from the Pail Mate minimizing stopping spraying to relocate
the unit.
On the other hand, the use of a pail caddy provides the ability to frequently and easily
relocate the Pail Mate if needed with no lifting for applications such as atrium plant care.
The modified SHURflo® 1.0 GMP pump included with the Pail Mate:
o
runs on-demand and is self-priming (when not spraying there is no battery drain)
o
uses Viton® valves and a Santoprene® diaphragm
o
has built in automatic over temp protection.
o
is quiet. Then we completely enclose it for protection, and it is even quieter.
o
has no metallic contact with the spray medium.
The pump enclosure is powder coated for enhanced durability
Battery power is provided by 1 or 2 DeWalt 18V plug in batteries or 1 or 2 DeWalt 20V
Lithium Ion
slide in batteries. Please note that using 2 batteries almost doubles the
amount of spray time.
Two DeWalt 18V battery sockets are installed on the pump enclosure. A DeWalt 18V to
20V battery adapter is inserted into each of them. When the Pail Mate comes out of the
box it is ready for 2 - 20V DeWalt to be inserted. To install 2 – 18V DeWalt, remove the
813-727-5894
Page
2
of
8
