Graco Project Painter Plus Owner'S Manual Download

Page: 1 / 19

Electric Airless Sprayer

OWNERS MANUAL

Project Painter

™

Plus

3A3582B

IMPORTANT SAFETY INSTRUCTIONS

Read all warnings and instructions in this manual and related manuals. Be familiar with the

controls and the proper usage of the equipment. Save these instructions.

Not approved for use in explosive atmospheres or hazardous locations.

For portable airless spraying of architectural paints and coatings.

FIRE AND EXPLOSION HAZARD

•

Use only non-flammable or water-based

materials, or non-flammable paint thinners.

Do not use materials having flash points

lower than 100° F (38° C). This includes, but

is not limited to, acetone, xylene, toluene, or

naphtha. For more information about your

material, request Safety Data Sheet (SDS)

from the supplier.

•

Spraying flammable or combustible materi-

als in a factory or fixed location must comply

with NFPA 33 and OSHA 1910.94(c) require-

ments in the USA and with all similar local

regulations in other countries.

3A3582B

Not approved for use in explosive atmospheres or hazardous locations.

For portable airless spraying of architectural paints and coatings.

Important Safety Instructions

Read all warnings and instructions in this manual, related manuals, and on the unit.

Be familiar with the controls and the proper usage of the equipment. Save these

instructions.

FIRE AND EXPLOSION HAZARD

•

Use only non-flammable or water-based

materials, or non-flammable paint thinners.

Do not use materials having flash points

lower than 100° F (38° C). This includes, but

is not limited to, acetone, xylene, toluene, or

naphtha. For more information about your

material, request Safety Data Sheet (SDS)

from the supplier.

•

Spraying flammable or combustible materi-

als in a factory or fixed location must comply

with NFPA 33 and OSHA 1910.94(c) require-

ments in the USA and with all similar local

regulations in other countries.

3A3582B

Not approved for use in explosive atmospheres or hazardous locations.

For portable airless spraying of architectural paints and coatings.

Important Safety Instructions

Read all warnings and instructions in this manual, related manuals, and on the unit.

Be familiar with the controls and the proper usage of the equipment. Save these

instructions.

Summary of Contents for Project Painter Plus




















Search results

Summary of Contents for Project Painter Plus

Reviews:

Related manuals for Project Painter Plus

Brands by name

Popular brands

Graco Project Painter Plus, Owner'S Manual

Search results

Summary of Contents for Project Painter Plus

Reviews:

Related manuals for Project Painter Plus

Brands by name

Popular brands