18V to 20V adapters and insert the 20V batteries.
Pail Mate
offers a simple and
safe environmental cleanup process. Unless the
chemical you are spraying recommends otherwise, we recommend the use of Pine-
Sol® as a cleanup solution.
This Pail Mate pump was designed for easy use and durability. Pail Mate features allow you to
dispense water-based products in half the time and effort of conventional hand pumps.
UNPACK and PREPARE FOR USE
Shipped items include
1 Pail Mate pump body with 25’ attached spray hose, pickup hose and base plate
2 DeWalt 18volt battery to 20volt battery adapters.
1 25’ spray wand
1 Spray handle
1 Operators’ Manual
See packing list for additional optional features you may have ordered
Assembly:
1.
Set the power switch to the off position.
2.
If using a pail cart, place the pail containing the product you intend to disperse in the
cart and remove its’ top. Place the Pail Mate on the pail and snap the base plate onto
the pail top.
3.
If not using a pail cart, place Pail Mate sprayer on product pail and snap the base plate
into the pail top.
4.
Attach the wand to the spray handle and tighten.
5.
Pail Mate comes with 2 20volt slide in battery adapters installed.
6.
Insert batteries into ports as straight as possible to avoid damaging the contacts.
7.
To use 18volt batteries remove the 20volt adapters and plug in the 18volt batteries.
8.
If you ordered additional accessories such as extra length hose or optional spray tip,
install them now.
9.
Go to the next section.
813-727-5894
Page
3
of
8
