HVLP/PRESSURE REDUCED AIR CAP AND FLUID NOZZLE CHART
MODEL
NO.
AIR CAPS
FLUID TIP
RANGE
*MAX GUN
INLET PRESS.
FOR HVLP
FAN
CONTROL
SCFM @
MAX GUN
INLET
STANDARD
IN CAT
PACK
AVAILABLE FLUID
NOZZLES TIPS
NEEDLES /
marking on needle
Included
33-0208 0.8mm (.022")
40-1808 (08)
33-0210 1.0mm (.040")
40-1810 (1810)
33-0212 1.2mm (.046")
40-1812 (1812)
Included
33-0213 1.3mm (.052")
40-1813 (1813)
33-0214 1.4mm (.055")
40-1814 (1814)
33-0215 1.5mm (.059")
40-1815 (1815)
Included
33-0217 1.7mm (.070")
40-1817 (1817)
Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4)
*Note: Air cap test gages are available to confirm HVLP compliance.
*Gun inlet pressures may vary as required by application
60-1317
11
13.5
23-2101
CPR
(Pressure
Reduced)
0.8 - 1.7
29*
CPR-FE
23-1301
(HVLP)
0.8 - 17
29*
The CPR-FE gun comes equipped with both a pressure reduced air cap 23-2101 and a HVLP air cap
23-1301 for areas requiring HVLP compliance.
23-2101 - consumes 11 cfm at 29 psi gun inlet.
23-1301 - consumes 13.5 cfm at 29 psi gun inlet.
23-2101 pressure reduced air caps can be used with the 0.8 mm - 1.7 mm fluid orifices listed below.
23-1301 HVLP air caps can be used with the full range of fluid orifices listed below.
CPR -FE
PRESSURE FEED SPRAY GUN
PRODUCT INFORMATION
DISTRIBUTED BY COATING EQUIPMENT TECHNOLOGY, INC
PHONE: 586-210-0555
WEB: www.cetinc.com
