Packard Bell EasyNote NM85, Руководство по обслуживанию

Страница: 108 / 142

CHAPTER 4: Troubleshooting
102
System timer error
■
Test or replace the CMOS battery, run the BIOS Setup Utility to
reconfigure system time, then reboot the system.
■
Test or replace the system board.
Real time clock error
■
Test or replace the CMOS battery, run the BIOS Setup Utility to
reconfigure system time, then reboot the system.
■
Test or replace the system board.
Previous boot incomplete - Default configuration
used
■
Run “Load Setup Defaults” using the BIOS Setup Utility, then reboot
the notebook.
■
Test or replace the CMOS battery, run the BIOS Setup Utility to
reconfigure system time, then reboot the system.
■
Test or replace the system board.
Memory size found by POST differed from
CMOS
■
Run “Load Setup Defaults” using the BIOS Setup Utility, then reboot
the notebook.
■
Test or replace the SO-DIMM.
■
Test or replace the system board.
Diskette drive A error
■
Make sure that the drive is defined with the proper diskette type in the
BIOS Setup Utility.
Incorrect Drive A type - run SETUP Make sure that the drive is defined with the proper diskette type in the
BIOS Setup Utility
System cache error - Cache disabled Test or replace the system board.
CPU ID: Test or replace the system board.
DMA Test Failed
■
Test or replace the SO-DIMM.
■
Test or replace the system board.
Software NMI Failed
■
Test or replace the SO-DIMM.
■
Test or replace the system board.
Fail-Safe Timer NMI Failed
■
Test or replace the SO-DIMM.
■
Test or replace the system board.
Device Address Conflict
■
Run “Load Setup Defaults” using the BIOS Setup Utility, then reboot
the notebook.
■
Test or replace the CMOS battery, run the BIOS Setup Utility to
reconfigure system time, then reboot the system.
■
Test or replace the system board.
Allocation Error for device
■
Run “Load Setup Defaults” using the BIOS Setup Utility, then reboot
the notebook.
■
Test or replace the CMOS battery, run the BIOS Setup Utility to
reconfigure system time, then reboot the system.
■
Test or replace the system board.
Failing Bits: nnnn
■
Test or replace the SO-DIMM.
■
Test or replace the BIOS ROM.
■
Test or replace the system board.
Fixed Disk n None
Invalid System Configuration Data
■
Test or replace the BIOS ROM.
■
Test or replace the system board.
Error Messages FRU/Action Sequence