Pacific Power Source UPC-32, Руководство по эксплуатации

Страница: 95 / 128

SECTION 5 REMOTE OPERATION
85
5.5.3.2 SCPI STATUS REPORTING (continued)
The STATus:OPERation and STATus:QUEStionable registers provide information about the present mode
of operation.

Transition of a CONDition bit to the true state causes the EVENt bit to be set true.

Unmasked ENABle bits allow an EVENt bit to be reported in the summary bit for that EVENt register
in the STATUS BYTE register.

Setting an ENABLe bit true, unmasks the corresponding EVENt bit.

Reading an EVENt register clears it.

All :STATUS registers are 16 bits ( Figure 5.3 ).
The STATus:OPERation registers provide information about the present mode of operation.
NOTE: Most bits in the following :STATus registers are not applicable to the UPC but are shown for
reference and may be used for future product enhancements.
The PROGram running bit (14) in the :STATus:OPERation registers indicates a stored program
(PROGRAM# 1-99) is running.
:STATus:OPERation:CONDition?
present condition query
:STATus:OPERation:ENABle
enables events to be reported in the SOS bit in the STB
:STATus:OPERation:ENABle?
STAT:OPER:ENABLE register query
:STATus:OPERation:EVENt?
latched condition query
The STATUS:QUESTIONABLE registers provide information about errors and questionable measurements.
NOTE: All bits in the following :STATus registers are not applicable to the UPC but are shown for reference
and may be used for future product enhancements.
:STATus:QUEStionable:CONDition?
present condition query
:STATus:QUEStionable:ENABle enables events to be reported in the SQS bit in the STB
:STATus:QUEStionable:ENABle?
STAT:OPER:ENABLE register query
:STATus:QUEStionable:EVENt? latched condition query