background image

Page 5

SKU 95156

For technical questions, please call 1-800-444-3353.

this Pressure Washer is designed for outdoor use only.  

8. 

Do not operate the 

Pressure Washer in a closed area or in a poorly ventilated area.  

When running, 

the Engine of this Pressure Washer produces carbon monoxide, a color-

less, odorless, toxic gas that, when inhaled, can cause serious personal 

injury or death.  Whenever possible, use a carbon monoxide detector (not 

included) to detect excessive carbon monoxide fumes in the work area and 

in the surrounding area.
do not force the Pressure Washer.   

9. 

This tool will do the work better and safer 

at the speed and capacity for which it was designed.

FIRE And EXPlOSIOn PREcAUtIOnS

Gasoline fuel and fumes are flammable, and potentially explosive.  

1. 

Use 

proper fuel storage and handling procedures.  Always have multiple ABC class 

fire extinguishers nearby.

Keep the Pressure Washer, its Engine, and surrounding areas clean at all 

2. 

times.
When spills of fuel or oil occur, they must be cleaned up immediately.

3. 

  Dis-

pose of fluids and cleaning materials as per any local, state, or federal codes and 

regulations.  Store oil rags in a covered metal container.

Never store fuel or other flammable materials near the Pressure Washer.

4. 

Do not smoke, or allow sparks, flames, or other sources of ignition around 

5. 

the Pressure Washer.
Keep grounded conductive objects, such as tools, away from exposed, live 

6. 

electrical parts and connections to avoid sparking or arcing.  

These events 

could ignite fumes or vapors.

Do not refill the Fuel Tank while the Engine is running or while the Engine 

7. 

is still hot.  

Do not operate the Pressure Washer with known leaks in the fuel 

system.

Use only Engine manufacturer recommended fuel and oil.

8. 

MEcHAnIcAl PREcAUtIOnS

Prior to performing service, maintenance, or cleaning procedures, always 

1. 

make sure the Engine’s Power Switch is in its “OFF” position.  Allow the 

Engine and Pressure Washer to completely cool.  then, remove the spark 

plug from the Engine.
do not alter or adjust any part of the Pressure Washer or Engine that is as-

2. 

sembled and supplied by the manufacturer.

Содержание 95156
























Отзывы: