Pacific hydrostar 95156 Скачать руководство пользователя страница 3

Page 3

SKU 95156

For technical questions, please call 1-800-444-3353.

2. 

do not operate power tools in explosive atmospheres, such as in 

the presence of flammable liquids, gases, or dust.  

Power tools 

create sparks which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while operating a power tool.  

3. 

Distractions can cause you to lose control.  Provide barriers or shields as need-

ed.

PERSOnAl SAFEty 

Stay alert.  Watch what you are doing, and use common sense when oper-

1. 

ating a power tool.  Do not use a power tool while tired or under the influ

-

ence of drugs, alcohol, or medication.

  A moment of inattention while operating 

power tools may result in serious personal injury.

dress properly.  do not wear loose clothing or jewelry.  contain long 

2. 

hair.  Keep your hair, clothing, and gloves away from moving parts.

  Loose 

clothes, jewelry, or long hair can be caught in moving parts.

Avoid accidental starting.

3. 

  

be sure the Engine’s Power Switch is in its 

“OFF” position before moving the Pressure Washer 

and

 before performing 

any service, maintenance, or cleaning procedures on the unit. 
Remove adjusting keys or wrenches before turning the Pressure Washer 

4. 

on.  

A wrench or a key that is left attached to a rotating part of the machine may 

result in personal injury.

do not overreach.  Keep proper footing and balance at all times. 

5. 

 Proper 

footing and balance enables better control of the power tool in unexpected situa-

tions.

6. 

Use safety equipment.  Always wear eye protection. 

 Always wear 

ANSI-approved safety impact goggles when using this product.  ANSI-

approved hearing protection must also be used.

tOOl USE And cARE

do not force the tool.  Use the correct tool for your application. 

1. 

 The correct 

tool will do the job better and safer at the rate for which it is designed.

do not use the Pressure Washer if the Engine’s Power Switch does not turn 

2. 

it on or off.  

Any tool that cannot be controlled with its power switch is dangerous 

and must be replaced.

Store idle tools out of reach of children and other untrained persons.  

3. 

Tools 

are dangerous in the hands of untrained users.

Содержание 95156
























Отзывы: