Page 11
SKU 95156
For technical questions, please call 1-800-444-3353.
OPERAtInG InStRUctIOnS
Properly locate the Pressure Washer:
WARNING!
this Pressure Washer is designed for outdoor use only.
•
Do not operate
the Pressure Washer in a closed area or in a poorly ventilated area.
When
running, the Engine of this Pressure Washer produces carbon monoxide,
a colorless, odorless, toxic fume that, when inhaled, can cause serious
personal injury or death. Whenever possible, use a carbon monoxide
detector (not included) to detect excessive carbon monoxide fumes in the
work area and in the surrounding area.
Keep your work area clean and well lit.
•
Cluttered and dark areas invite ac-
cidents.
do not operate the Pressure Washer in explosive atmospheres, such as
•
in the presence of flammable liquids, gases, or dust.
The Pressure Washer
and its Engine can create sparks which may ignite the dust or fumes.
Make sure the Pressure Washer is located on a flat, level, sturdy surface ca
-
•
pable of supporting the weight of the Pressure Washer and any additional tools
and equipment.
Proper Use Of the Safety lock Off latch:
To prevent accidental discharge of high pressure water, the Safety Latch on the
Trigger (201) should be engaged whenever the Pressure Washer is not in use.
(See Figure d.)
Start Up Procedure:
Select the proper Nozzle (200) for the job and attach the Nozzle to the Spray
1.
Wand (202).
(See Figure d.)
Make sure the water supply is connected and turned on.
2.
Release the Safety Lock Off Latch on the High Pressure Gun (199) if locked.
3.
(See Figure d.)
To allow air to escape from the High Pressure Hose (198), squeeze the Trigger
4.
(201) of the High Pressure Gun (199) until there is a steady stream of water com-
ing from the Nozzle (200).
(See Figure d.)
Start the Engine:
Check to make sure the Fuel Tank (102) is filled with unleaded gasoline. Also,
1.
make sure the Engine and Pump unit have the proper level of oil.
(See Figures A, b, and c.)
