Pacific hydrostar 65078, Руководство по установке и эксплуатации

Страница: 20 / 37

Page 20 For technical questions, please call 1-800-444-3353. SKU 65078
troubleshooting
Problem Possible causes Probable solutions
Output pressure
varies
Not enough water supply. 1.
Water inlet screen is clogged. 2.
Nozzle is clogged. 3.
Nozzle has mineral build up. 4.
Check water supply hose for kinks, 1.
leaks, or blockage. Open faucet all
the way.
Remove inlet screen and rinse out.
2.
Remove Nozzle and clean. 3.
Remove Nozzle and clean with 4.
vinegar.
No intake of
chemicals.
Chemical hose not properly 1.
inserted into unit.
Tube cracked or split.
2.
Wrong Nozzle. 3.
Injector turned off. 4.
Injection tube strainer clogged. 5.
Nozzle blocked. 6.
Dried chemicals in injector. 7.
Push firmly into injector. Replace 1.
tube.
Switch to black Nozzle.
2.
Turn collar counterclockwise. 3.
Clean strainer. 4.
Clean Nozzle. 5.
Dissolve by running warm water 6.
through the injection tube.
Run clean water through injector
7.
until clear.
Follow all safety precautions whenever diagnosing or servicing the
equipment or engine.
PLease read tHe FOLLOwing careFuLLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR ExPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.