manualshive.com logo in svg

Pacific energy FP30 LE, Инструкция по установке и эксплуатации, Страница: 24 / 48

Поделиться
Скачать
Pacific energy FP30 LE Скачать руководство пользователя страница 24

 Option: Remote Heat Duct Kit Installation 

This Fireplace is designed to use the optional Pacific Energy Remote Heat Kit (WODC.RHKIT).  This kit allows 
heat to be ducted from the casing of the fireplace (using listed B-Vent) to the room or other parts of the home. 
One or two Remote Heat Kits may be installed on the fireplace. The Remote Heat Kit includes a blower that 
will require an 120V electrical connection.  

The Remote Heat Kit requires 

6" Listed/Approved B-vent gas venting

. This allows reduced clearances 

in the wall spaces. Follow the clearances and applicible installation guidelines in the vent manufacturers 
instructions, this includes the use of firestops when passing through walls or floor spaces 

WARNING: THE CHASE ENCLOSURE MUST HAVE A MINIMUM 30in²  (194 cm²) ROOM AIR INLET FOR 
EACH REMOTE HEAT KIT INSTALLED ON THE FIREPLACE.  The inlets can be combined, but it must be 
60in² or greater. 

A chase air inlet is not required if a remote heat kit is not installed, but a single inlet is recommended 
for efficiency. *A minimum 30in

2 

 Inlet is required if the the chase has vent openings or is open in any 

way.

Parts:

ITEM   DESCRIPTION   

    

PART NUMBER

1 

DUCT ADAPTER ..............................................WODC.9128 

2  OUTLET GRILL ...................................................... 5096.854 
3  BACKFLOW DAMPER .....................................WODC.7940 

4 

TRANSITION BOOT ..............................................5096.853 

5  BLOWER CASING FACE PLATE ..........................................  
6  BLOWER FAN BRACKET .....................................................  

7 

ELECTRICAL CONNECTION COVER ..................................  

ITEM   DESCRIPTION   

   

  PART NUMBER

8  REMOTE BLOWER BOX ......................................................  
9 BLOWER ................................................................. 5024.65 

10  WIRE PIG TAIL .....................................................................
11  STRAIN RELIEF ....................................................................  
12  RHEOSTAT KIT ...................................................... 5025.001 
13  JUNCTION BOX ...................................................................
14  INLET GRILL ......................................................... 5096.851  

12  

5  

1  

4  

7  

11  

13  

8  

2  

6  

3  

14  

9  

10  

Figure 20:  Replacement parts.

24

100004186_040523-48

FP30 LE

Содержание FP30 LE

















































Отзывы:

Нет отзывов