Pacific energy Estate A Series, Инструкция по установке и эксплуатации

Страница: 15 / 36

15
Venting System Components Dura-Vent GS Catalog #
galv. black
6" pipe length 908B
9" pipe length 907B
12" pipe length 906 906B
24" pipe length 904 904B
36" pipe length 903 903B
48" pipe length 902 902B
11" - 14 5/8" adjustable pipe length 911B
90° elbow 990 990B
45° elbow 945 945B
High wind vertical termination cap 991
Horizontal square termination cap 984
Snorkel termination cap - 36" 981
Snorkel termination cap - 14" 982
Vinyl siding standoff 950
Round ceiling support/wall thimble 940
Cathedral ceiling support box 941
Storm collar 953
Ceiling firestop 963
Roof flashing 0/12 - 6/12 943
Roof flashing 7/12 - 12/12 943S
Wall straps 988
Wall thimble 942
Estate Dura-Vent pipe adaptor ESTD.DVADPT
Estate Snorkel adaptor ESTD.SNADPT
Wall Termination Venting
To connect the Dura-Vent GS venting system to the Estate Fireplace
flue outlet, an Estate Pipe Adaptor is required.
A minimum 6" vertical length must be installed before the first 90°
elbow. With this minimum vertical rise, a maximum horizontal run of
18" is permitted. For longer horizontal runs, the vertical rise must also
increase. The rise and run must be constrained to the boundries of
the chart shown in figure #1.
A horizontal run of vent must have a 1/4" rise for every 2 ft.of run
towards the termination.
Roof Termination Venting
To connect the Dura-Vent GS venting system to the Estate Fireplace
flue outlet, an Estate Pipe Adaptor is required.
A minimum 4' vertical length must be installed before the termination
cap or the first 90° elbow. The total vent length must not exceed 40'.
Any combination of rise and run may be used but must be constrained
to the boundries of the chart shown in figure #2.
A horizontal run of vent must have a 1/4" rise for every 2 ft.of run
towards the termination.
Fig. # 20c
f i r e - p a r t s . c o m