Pacific energy ESPR.BODYB, Инструкция по установке и эксплуатации

Страница: 30 / 40

Burner tray
screws
Figure 45: Burner tray.
Screws to
secure burner
Figure 46: Burner.
Figure 47: Ember placement.
Pilot Air opening
Figure 48: Pilot and air opening.
Burner and Tray Installation / Removal
Burner Tray Installation / Removal
Installation
Place the burner tray in the fireplace.
Turn off main gas supply to unit and
connect 3/8” flex tubing and power cord
from inner firebox . Secure tray with screws
placed around the perimeter of the tray
using a screwdriver, as seen in Figure 45.
Removal
Remove the screws seen in Figure 45 using
a screwdriver. Turn off main gas supply to
unit and disconnect 3/8” flex tubing from
inner firebox. Also disconnect power cord
from inner firebox and remove the burner
tray.
Burner Installation / Removal
Installation
Place the burner in firebox so that the
venturi is over top of the orifice. To secure
the burner, insert the screws as seen in
Figure 46 using a screwdriver .
Removal
Remove the screws as seen in Figure 46
and lift the burner out of the unit.
Embers Placement
Place embers chunks in rock tray as seen
in Figure 47. Do not block air openings and
pilot elements with embers.
30 5056.201-A
ESPRIT 280617-40