Pacific energy ESPR.BODYB, Инструкция по установке и эксплуатации

Страница: 29 / 40

1
2
3
4
Figure 41: Panel set.
Back panel
Figure 42: Back panel.
Side panel
Figure 43: Side panel.
Baffle
Figure 44: Baffle mounts.
Fan removal before fireplace installation.
1. Remove fan panel at the rear side of the fireplace as seen in Figure 40.
2. Disconnect fan electrical wires and remove fan fasteners.
3. Remove fan out of the firebox assembly.
Installation/Removal
1. Insert back panel (1) so that it is sitting on ledge
at the back of the firebox as shown in Figure 42.
2. Insert first side (2 & 3) panel by inserting the front
edge of the panel into the lip at the front of the
firebox.Then slide the back of the panel until it
reaches the firebox side wall. See Figure 43.
3. Repeat steps 2 for the second side panel.
4. To hold panels in place, install the baffle, from the
burner kit, by resting the back flange on top of
the back panel and use two screws to secure the
front of the baffle to the top of the firebox, seen
in Figure 44.
5. Do panel removal in reverse order.
Panel Installation / Removal
29 280617-40
5056.201-A
ESPRIT