Pacific Communications PDR 16-PC, Руководство пользователя

Страница: 26 / 107

User’s Manual
20
Setting Up the Text-In (Text-In version only)
1. Click the
Text-in device
icon .
2. Move to
Enable
, and check the box to enable to use the selected text input device.
3. Move to
Use Text-In OSD
, and check the box if you want to display text-in information on the image.
4. Click the
Select Text-In System
button to set up the text-in device. Select the model of installed text-in system
from the
Text-In Model
list, and the COM port to use from the drop-down list. Click the
Set up port…
button
to display the
Set up COM Port
dialog box. Set the
Baud rate
from 300 to 256,000, select the
Parity
from
None
,
Even
or
Odd
parity, select the
Data bit
from
7 bit
or
8 bit
format, select the Stop bit from
1 bit
or
2 bits
from the drop-down list. You can save your changes by clicking the
OK
button. Selecting
Cancel
exits the
dialog box without saving the changes.
5. Move to
Device
, and select the type of text-in device to use.
NOTE: Each type of text-in device (User Define, PUMP, POS, and so on) has different setup options which can
be defined by the user.
6. Move to
Case Sensitive
, and check the box to distinguish between capital letters and small letters from text-in
data.
7. Move to
Transaction Start
, and enter the character string to be considered as transaction start. If the
Any
character
box is checked, preset any character will be considered as transaction start.
8. Move to
Transaction End
, and enter the character string to be considered as transaction end.
NOTE: Entering multiple keywords for Transaction Start / End are supported. Use a semi-colon (;) to delimit
each keyword. When the semi-colon is included in Transaction Start / End itself, use a double semi-colon (;;).
9.
Move to
More Lines
, and set the line count after preset character string for transaction end. The DVR will
include preset line count in one transaction.
10. Move to
Line Delimiter
, and enter the character string that divides each text-in line.
11. Move to
Ignore String
, and enter the character string. The DVR will ignore the text-in line including the string
which is set in this field.
12. Move to
Display Dwell
, and set the dwell time to display the text-in information by holding down and dragging
the pointer. You can set the dwell from 1 to 60 seconds.