Table of Contents
file:///C|/PACH-CO.COM-2022-B/online_manual/qvoip_manual.htm[3/24/2022 1:59:26 PM]
Input Devices and Door Sensor Wiring Diagram
Satellite System Wiring Diagram
CHAPTER 3 KEYPAD CORRELATION
TABLE
Log-in to Programming Mode
Function Code 00: Change Master Code
Function Code 01: Add New Tenant Directory
Function Code 02: Edit Existing Directory
Function Code 03: Delete Tenant Directory
Function Code 04: Clear All Tenant Directories
Function Code 05: Enable or disable Call
Function Code 06: Add New Access Code
Function Code 07: Delete Access Code
Function Code 08: Clear All Access Codes
Function Code 09: Access Code Digit
Function Code 10: Add New Card or Transmitter
Function Code 11: Delete Card or Transmitter
Function Code 12: Clear All Cards and
Transmitters
Function Code 13: Set Time
Function Code 14: Set Date
Function Code 35: Temporary Card
Function Code 36: Special Card
Function Code 38: System Acknowledge
Function Code 39: Disable and Enable Remote Access
Function Code 40: DTMF Relay 1
Function Code 41: DTMF Relay 2
Function Code 42: Relay 2 Mode
Function Code 43: Do Not Disturb Zone
Function Code 44: Disable Time Zone Relay
Function Code 45: Relay 1 and 2 Unlock Timer
Function Code 46: Firmware Version
Function Code 48: PBX Enable
Function Code 49: Edit Existing Access Code, Temporary Code and
Special Code
Function 50: Erase Memory to Factory Default
Function Code 51: Welcome Screen
Call from the System
Opening Door Remotely
Opening Door Using Access Code, Temporary Code and Special Code
Opening Door Using Card, Temporary Card, and Special Card
Opening Door Using Transmitter, Temporary Code Transmitter and
Special Code Transmitter
Extending Talk Time
Call the System from Remote Location
Applicable for Quantum QC1IP and QC2IP
LIMITATIONS OF LIABILITY
This manual is subject to change without notice.
Pach and Company is not liable for any errors that might occur from use of this document, nor is any commitment to
update the information herein implied.
Pach and Company does not assume any liability for any damages, which may arise in installation or use of the Quantum
QVOIP Series Pach and Company does not assume liability for any incompatibility between the Quantum QVOIP Series
and users devices.
Pach & Company reserves the right to make changes without prior notice to any products in order to improve reliability,
function or design.