PACH & COMPANY QUANTUM QVOiP SERIES, Руководство пользователя

Страница: 38 / 39

Table of Contents
file:///C|/PACH-CO.COM-2022-B/online_manual/qvoip_manual.htm[3/24/2022 1:59:26 PM]
Swipe the card as shown below. The card reader antenna is mounted behind the black square window.
5.5 Opening Door Using Transmitter, Temporary Code Transmitter, and Special Code Transmitter
Not applicable for new generation.
5.6 Extending Talk Time
The talk time timer is set on function code 27 . The warning beep will be heard one minute before the talk time is expired. It
can be extended more another full cycle by pressing #
5.7 Call the System from Remote Location
1. The system must be install in Intercom and Call Forwarding Mode Wiring Diagram or Call Forwarding Mode
wiring Diagram
2. Function code 38 must be set at least for 1 ring
3. Function code 39 must be set to 1
4. You must have the system phone number
5. Call the system phone number if the system answered, short beep will be heard.
6. Press # then 4-digit Master code (default is 0000), short beep will be heard if master code is accepted
7. Press * to establish two ways communication
8. Press 9 to release relay 1 (door 1) or 8 to release relay 2 (door 2).
CHAPTER 6