![Pacetronix ZEUS-1 Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/pacetronix/zeus-1/zeus-1_manual_3116798017.webp)
6.3
OFF Switch
Switch the unit OFF by pressing OFF switch twice in 4 sec. Press and
held switch for 1 sec and then release and press again. If it doesn’t gets
OFF then repeat the process.
6.4
Pause / Unlock Button
Pause button is used to stop output of the unit for both chambers.
(When pressed and held the output stops for at the most 10 seconds). If
pause is required again after 10 seconds, then release button and press
again.
6.4.1
Device LOCK
Alternate function of this button is to unlock the device. The device
will go in LOCK mode after 20 pacing/sensing cycles if the device is
kept idle. The message “LOCK” will appear on the display along with
other parameters. After this parameters will not be changed even after
moving rotary switches. To unlock the device press “Pause” button
once then “LOCK” message will disappear and now parameters can be
changed.
Press “PAUSE” switch to “UNLOCK”
NOTE
:
Please make sure after unlock all the parameters are at
safe values as after unlock parameters will be set as per rotary
switches position because as the rotary switch is rotated in LOCK
condition then device will set values after UNLOCK it.
6.5
Knob Controls
The available parameter range is printed on the panel, e.g the “Rate
knob” ranges from 30 ppm to 250 ppm. Rotate the “knob” clockwise
or anticlockwise to increase or decrease the parameters value
respectively. Changed parameter value displayed on LCD screen
accordingly.
Note :
Parameters will be displayed as per the modes.
‘Rate’ & ‘Pulse width’ will be displayed in all modes.
Modes
Parameter Displayed
Parameter not Displayed
AOO
A-Amp
V-Amp, V-sense, A-sense,
AVI,Aref
AAI
A-Amp, A-sense,Aref
V-Amp, V-sense, AVI
Содержание ZEUS-1
Страница 7: ...ZEUS 1 ...