manualshive.com logo in svg

PaceSaver Scout M Series, Руководство пользователя, Страница: 44 / 49

Поделиться
Скачать
PaceSaver Scout M Series Скачать руководство пользователя страница 44

42

Scout M1 “PBR” (Push Button Reversible) Instructions

STEPS TO CONVERT YOUR SCOUT M-Series WHEELCHAIR 

FROM FRONT-WHEEL DRIVE TO REAR-WHEEL DRIVE

1.) 

Turn power off at the joystick console.

2.) 

Locate the pull pin holding footplate assembly to main frame.  Pull upward on ring until pin is 

 

removed from  square frame tube.

3.) 

Pull the footplate assembly outward until it is separated from main frame.

4.) 

Insert footplate assembly into square tube of main frame at opposite end of wheelchair.  Push 

 

assembly inward until holes through frame align with desired holes in footplate assembly.  

 

Replace pin completely through square tubes until seated fully downward.

5.) 

Flip the switch located on the cover to the inside.  See the label on the cover ( see below) for 

 directions.

6.)  

Rotate the seat 180 degrees and lock it into place (seat only swivels one direction, the direction can 

 

be changed to rotate to the opposite side, ask your dealer for details.

Decal on cover by 

Reversible Switch

Содержание Scout M Series


















































Отзывы:

Нет отзывов