manualshive.com logo in svg

PaceSaver Scout M Series, Руководство пользователя, Страница: 27 / 49

Поделиться
Скачать
PaceSaver Scout M Series Скачать руководство пользователя страница 27

25

 

Disassembly and Assembly of the Power wheelchair

          

 

The  power wheelchair's easy separation makes it very convenient to disassemble and 

assemble the unit.  Complete disassembly can be accomplished in seconds WITHOUT tools.  

The procedure is as follows.

  

Make sure the power button has been placed in the off (no lights) position. Remember, it 

should already be in the OFF  position since it was placed there when you last got  off 

the wheelchair. Disconnect the power cord and unclip it from its clips. Unlock  the  seat  lock, 

lift the seat assembly up  and remove.  Lift off the cover while passing the cable and con-

nector through the  hole in the cover.

        

Disconnect each battery by depressing the tab on each battery plug to unplug the 

cable. Lift batteries out using carry straps provided.

Next, you need to remove the Footplate assembly from the front of the wheelchair. Pull up 

on the pull pin located  just  behind the footplate on the main frame. Pull the footplate section 

up out of the way.  

REASSEMBLING THE WHEELCHAIR

To reassemble the wheelchair, simply repeat the same steps in reverse order.  Retract the pull 

pin and insert the footrest section on to the front end, replace the pull pin. 

    

Connect the battery cables. Align the red dots on each connector so that they line up. Push  

the plug straight in until the connectors click together. Place the connectors between the bat-

teries.

          

Replace the cover by running the control cable through the hole in the cover and setting the cover 

securely on the frame.  Make sure the Velcro on the cover attaches to the Velcro on the  frame 

support pieces.

Place the seat assembly into the chrome seat post . Make sure  the  seat lock lever is in  the  unlock  

position to avoid damage. Rotate the seat assembly to insure it is lowered completely and lock it 

in the forward position. Connect the joystick control cable to the cable from the power base by 

aligning the white marks on the plugs and locking the completed connection in place at the rear 

frame of the seat.

          

Follow the entry instructions elsewhere in this manual, and go for a ride.

 

  

Содержание Scout M Series


















































Отзывы:

Нет отзывов