manualshive.com logo in svg

PaceSaver Scout M Series, Руководство пользователя, Страница: 14 / 49

Поделиться
Скачать
PaceSaver Scout M Series Скачать руководство пользователя страница 14

12

REACHING, LEANING, BENDING AND BENDING - FORWARD

Position the rear casters so that they are extended as far rearward as possible and engage 

motor locks/clutches.  DO NOT LEAN FORWARD OF THE ARMRESTS.

REACHING, BENDING - BACKWARDS

WARNING

DO NOT lean over the top of the back upholstery.  This will change your center of gravity 

and may cause you to tip over.

Position wheelchair as close as possible to the desired object.  Point rear casters rearward 

to create the longest possible wheelbase.  Reach back only as far as your arm will extend 

without changing your sitting position.

WARNING:

 For units with the optional Power Seat, only drive the wheelchair 

when the power seat is in the lowest position to avoid tipping and serious injury.  If 

you are unable to follow this instruction, consult your dealer for alternatives.

Persons having disabilities which limit their ability to remain erect without assistance, 

(stroke patients, severe muscular diseases, etc.) should carefully evaluate whether they 

should operate a wheelchair at all.  If they decide, with the advise of their physician or 

another advisor, that they are capable of safely operating a wheelchair, they should con-

sider the use of a bicycle helmet or pads when operating a wheelchair.  These articles 

would help protect them should they find themselves in a hazardous situation where they 

could tip over or fall because of their lack of balance.

DIFFERENT STYLES OF POWER WHEELCHAIRS HAVE DIFFERENT INCLINE 

CLIMBING ABILITIES. CAREFULLY STUDY THE CHART TO SEE THE CORRECT 

SPECIFICATIONS FOR YOUR UNIT. DO NOT EXCEED THE SPECIFICATIONS OF 

THE POWER WHEELCHAIR STYLE YOU PURCHASED!

Содержание Scout M Series


















































Отзывы:

Нет отзывов