-37-
DIAGNOSTIC INFORMATION
Leisure Lift products are known for excellent reliability and service. To further enhance this capability, your PaceSaver is
equipped with a state of the art diagnostic system. While the system does indicate basic areas the user can check, it's primary
purpose is to help your dealer identify the problem to get your scooter repaired as quickly as possible. When the key is on and
the system detects a problem, the scooter will not run or will shut down. The BATTERY METER will MOVE continuously
for about fi ve (5) seconds. It will then proceed to fl ash a 2 part code. You may also depress the horn button during this
diagnostic cycle and the horn will beep the codes in sync with the meter movement. Use the codes on the following
chart to determine the proper corrective action. If the METER continues to MOVE after following the procedures in
the LED Diagnostic Code chart, do not ride the scooter. Notify your dealer for repair.
ERROR
PROBLEM
POSSIBLE
CORRECTIVE
1-1
1-2
2-1
2-2
2-3
2-4
4-2
5-3
Brake Short
Brake Open
Motor Short
Motor Open
Power Relay Short
PSL Motor Short
Charge Mode Time
Out
Throttle Failband
Shorted brake,
Loose/broken connection to
brake, DC motor controller
Brake shorted to case, Miss-
ing/open brake, Loose/broken
connection to brake, DC motor
controller
Bad motor, Loose/broken con-
nection to motor, DC motor
controller
Bad motor, Loose/broken
connection to motor, Brake
manually released, DC motor
controller
Defective batteries, DC motor
controller
PSL motor, Loose/broken
connection to PSL motor, DC
motor controller
Bad charger cable, Bad bat-
teries, Bad charger, DC motor
controller
Throttle control pot is off cen-
ter/open, Loose/broken connec-
tion/cable, User interface, DC
motor controller
Check wiring/plugs to motor/
brake - consult dealer
Check wiring/plug to motor/
brake-consult dealer
Check wiring/plugs to motor-
consult dealer
Check wiring/plugs to motor-
consult dealer
Load test batteries - consult
dealer
Check wiring/plugs to motor -
consult dealer
Charging unit, charger plugged
in, check wiring - consult dealer
Check throttle for center
CODE
CAUSES
ACTION
DIAGNOSTIC CODES (1108)