-20-
WARNING:
A scooter's seatlock IS NOT designed to hold the seat while you push off
one side to assist yourself in standing! You risk injury if the seat is used in the wrong
way! Do not attempt to overtighten the seat lock. If it does not hold under its intended
use while you are riding the scooter, see the section regarding adjustment later in this
manual, or contact your dealer immediately!
Seat Height Adjustment
(FIGURE 3)
The seat assembly height is adjustable. The factory places the seat in the
next to
the lowest possible position. On some styles, there are three higher positions in one inch
increments Owners of Atlas Series scooters should
consult the Manual Addendum for additional details.
The adjustment procedure is as follows.
1. Remove the seat assembly by unlocking the
seat lock and lifting the seat assembly straight up
and set it aside.
2. Locate the seat height adjustment bolt and nut
located at the base of the chrome seat post
(See fi gure 3).
3. Remove the nut, bolt, and small metal cones.
Take note of their position
in order to correctly
replace them.
4. The chrome seat post will now slide up and down.
5. Position the chrome post to new desired height.
6. Replace the metal cones, bolt, and nut in their proper order. Tighten until all play is elimi-
nated.
7. Replace the seat assembly and test the new height.
It is recommended that the seat assembly be positioned at the lowest possible comfortable
seat height. PaceSaver stability will be improved at the lower height.
FIGURE 3
