-15-
"SOFT TOUCH" TILLER INFORMATION SHEET
PACESAVER SCOOTERS ARE EQUIPPED WITH A "SOFT TOUCH" TILLER
HEADLIGHT
- The headlight is operated by the switch located on the back panel of the tiller.
TURN SIGNAL
- If your scooter has the optional turn signals, it will have push button switches located
on the sides of the tiller.
CAUTION:
The headlights and optional turn signals must be shut off after use to
prevent discharging your batteries.
TILLER PIVOT MECHANISM
- The tiller angle can be adjusted from vertical to horizontal. To make
adjustments, push on the release lever while moving the tiller closer or farther away for yourself. Let go
of the release lever to lock the tiller into position (See FIGURE 2).
CHARGER CONNECTIONS
ON-BOARD
CHARGER
- If you have an on-board charger it will be mounted on the scooter.
You will have a charger cord with a 110 VAC plug on one end and a 3 pin rectangular plug on the
opposite end. Plug the cord into the rectangular charger port on the back plate and the opposite end
into and AC outlet. Refer to the battery charging section in this manual for more information
(See FIGURE 2).
OFF BOARD CHARGERS
- If you have an off board charger, it will not be mounted on the
scooter. You will have a charger with a cord having an AC plug on one end and a cord with a
round plug on the other end. Connect the round plug to the tiller back plate and plug the AC cord
to an AC outlet. Refer to the battery charging section in this manual for more information
(See FIGURE 2).
NOTICE:
The battery charger provided is specially designed for use with PaceSaver brand equipment.
In the unlikely event of failure it should be replaced only with a PaceSaver approved charger to assure
proper performance ot the charger and scooter.
FIGURE 2
