22
TDC777D INSTALLER’S MANUAL (502-3432110)
OPERATING THE SET-TOP (cont.)
PACE USER SETTINGS
TV Aspect Ratio
TV Display Capability
Auto Pillarbox
Closed Captions
Front Panel Settings
Hard Disk Sleep Mode
HDMI Settings
Restore Defaults
Select[OK] Exit[POWER]
Video Format : 1080i
Current output resolution from
the set-top
Displaying a picture on the HDTV screen
If the set-top is connected to the HDTV’s component video or HDMI input and is turned on (the
POWER
light
is green), but the HDTV does not initially display a picture from the set-top, the HDTV may not support the set-
top’s current output resolution (for further details on resolutions, see page 26). You therefore need to change
the set-top’s output resolution as follows:
1. First press the
POWER
button on the remote control (
POWER
light goes red), then press the
MENU
button.
2. Next, press the
ZOOM
button on the remote control (the button could be labeled
ASPECT
) until a picture
appears.
Each button-press changes the set-top’s output resolution, which also appears on the TV screen.
After a few seconds, you should see the PACE USER SETTINGS menu.
3. Press the
POWER
button to remove this menu and return to normal viewing.
Setting up subtitles
Subtitles in various languages may be transmitted with TV programs. You can set up the set-top to display
subtitles, when they are available. You can also set the preferred language for these subtitles. There is a choice
of several languages, including English.
If you set subtitles to be “on”, they will be displayed in the preferred language only when subtitles in that
language are transmitted with a program. For example, if you set subtitles to be “on” and in Spanish, but only
French subtitles are transmitted with a particular program, you will see French subtitles for that program, not
Spanish.
Note: You can also turn on closed captions (see pages 29 and 30) to give subtitles, but any subtitles you set
up using this PACE SUBTITLE SETTINGS menu will take priority.
Selecting subtitles in your preferred language
1. Make sure that the set-top is turned on (the
POWER
light is green).
2. Press the
POWER
button on the set-top (the
POWER
light goes red), then press the
INFO
button.
“oFF” (indicating that subtitles are currently set to be off) or “on” (indicating that subtitles are currently set
to be on) appears on the front-panel display and the PACE SUBTITLE SETTINGS menu appears on the TV
screen (see right).
3. Press
U
or
D
to highlight “Subtitles”, then press
SELECT
to turn them on or off.
4. Press
U
or
D
to highlight “Subtitle Language”, then use the
SELECT
button to choose the language you
want (the language changes each time you press
SELECT
).
A three-letter abbreviation for the language appears on the front-panel display while you do this.
5. When you have finished making changes, press the
POWER
button to remove the PACE SUBTITLE
SETTINGS menu and return to normal viewing.
INFO
button
front-panel display
PACE SUBTITLE SETTINGS
Subtitles : Off
Subtitle Language : English
Select[OK] Exit[POWER]
POWER
button
