Pace DC700X, Руководство оператора

Страница: 8 / 44

6
SAFETY INFORMATION (cont.)
Safety aspects of connections
Full details of the rear panel are on page 8.
Connecting
Do not connect your set-top (or any other equipment such
as a TV or VCR) to the power supply until you have properly
connected all the other cables.
Your set-top operates with a 120 V AC, 60 Hz power supply.
Do not connect your set-top to any supply other than this.
This set-top is equipped with a two-wire power cord, with a
polarized plug at one end. The other end of the cord is fitted with
a polarized connector, which is shaped such that it can be fitted
only one way into the power input jack of your set-top. Connect
this end first, before inserting the polarized plug into the wall
socket-outlet.
Disconnecting
Disconnect your set-top from the power supply before you
disconnect any other equipment from its rear panel.
The only way to disconnect your set-top from the power supply
is to remove the power cord from the wall socket-outlet. Your
set-top must therefore be installed near to the wall socket-outlet,
which should be easily accessible.
The CABLE IN connector is designed for
connection to a cable network only.
You must not connect any other equipment,
such as a VCR, to this input.
POWER INPUT
CABLE IN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
WHEN SERVICING ONLY USE
IDENTICAL REPLACEMENT PARTS
IR RECEIVE
POWER INPUT
120V AC 60Hz
DOUBLE INSULATED
The model number, serial
number and electrical
rating of this set-top are
on a label on its base.