PICO 155P Precision Saw
I
NSTRUCTION
M
ANUAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] Web: http://www.metallographic.com
1
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
1.0 Safety Guidelines
1.1 Warning Sign
!
This sign points to special safety features on the machine.
1.2 Safety Precautions
Careful attention to this instruction manual and the recommended safety guidelines is
essential for the safe operation of the
PICO 155P
wafering saw.
Proper operator training is required for the safe operation of the
PICO 155P
wafering saw.
Any unauthorized mechanical and electrical change, as well as improper operation, voids all
warranty claims. All service issues need to be reported to the manufacturer / supplier.
!
Before operating, cutting chamber hood must be closed.
!
Use only certified wafering wheels from a professional supplier. Improper blade
selection voids warranty. (For appropriate blade selection, refer to the Abrasive Blade
Selection Guidelines Chart in Section 9)
!
Disconnect power before opening electrical back panel.
!
Replacement parts should be installed only by qualified personnel.
!
Securely clamp the part / sample to the working table. During cutting, consider that the
part may pinch and cause jamming of the wafering blade. Use the appropriate clamping
devices to avoid this occurrence.
!
Never start a cut under load.
1.3 Emergency Statement
Always follow proper operational guidelines and avoid bodily contact with coolants and
abrasives. Seek appropriate medical care for cutting injuries.
