Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
14
PICO 155P Precision Saw
I
NSTRUCTION
M
ANUAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] Web: http://www.metallographic.com
!
!
3.3.6 Installation
Sample fixture can be positioned
differently with respect to the
blade.
Note: For soft or gummy
materials, it is recommended
that the sample be positioned
on the back side of the blade.
This will reduce the tendency
of the sample to jam the blade.
Machine can run at either 110V or 220V
power.
Connect the electrical plug and activate the
main power switch (note: the hood must be
closed for power to turn on at the front
panel). Verify that the emergency stop
switch is deactivated and the system will be
ready for operation.
Turn emergency
switch clockwise to
release
Power
switch
The safety fuse takes a 3 amp fuse if running
the machine at 110v or a 1.5 amp fuse if
running at 220v.