Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
13
PICO 155P Precision Saw
I
NSTRUCTION
M
ANUAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] Web: http://www.metallographic.com
3.3.5 Installation - dressing fixture
Select proper dressing stick.
Install onto the dressing fixture
and secure with the allen screws.
Slowly feed dressing stick into
wafering blade while running saw at
a slow speed.
Align dressing fixture with lip on
front of casting panel with opening
in cover. Then attach the dressing
fixture to the cover with the allen
screws.
For optimum cutting
performance, it is
recommended that the wafering
blade be periodically dressed.
This will improve/decrease
cutting times as well as extend
the life of the blade.
Note: Even for hard ceramic
materials, dressing is important
as the wafering blades are metal
pressed blades and the metal
from the blade itself can coat or
blind the diamond, thus resulting
in less efficient cutting.
Proper dressing should be
conducted at slow speeds and
low loads (e.g., 300 rpm and low
feed rate).
