Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
7
PICO 155P Precision Saw
I
NSTRUCTION
M
ANUAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] Web: http://www.metallographic.com
2.4 Features
Standard
Cutting
set-up
With table top
cutting set-up
Improved Coolant System
The
PICO 155P
is an upgraded version
of the PICO 155 medium speed wafering
saws. Utilizing a 24V pump and flexible
coolant lines, the
PICO 155P
allows for
better coolant distribution, even for
smaller diameter wafering blades.
Motor feedback
The
PICO 155P
is equipped with a 125 W
motor that has a feedback loop for
maintaining the cutting velocity, even
under higher loads and increased drag.
In addition, the circuit board has
overload protection feedback which will
stop the motor if the blade becomes
jammed or pulls too many amps.
Easy to use
The
PICO 155P
is a user-friendly
precision cutter with simple controls.
Simply align the sample and start the cut.
The variable speed motor can easily be
adjusted by turning the knob on the front
panel. Following completion of the cut,
the motor will stop and activate an
audible buzzer.
Multi-purpose machine
The
PICO 155P
saw is a very versatile
precision cutter. It can be used as a
standard precision saw or as a tabletop
saw for cutting larger samples such as
printed circuit boards.
