P1PE P3000PWA, Руководство пользователя

Страница: 10 / 28

10
PRESSURE WASHER IO N A T P A R E P R
ATTACHING THE SPRAY GUN (Fig. 5 & 6)
Screw the spray wand and the trigger handle together until they are secure.
1. Insert the inlet coupler of the spray hose into the threaded fitting on the high pressure spray gun and thread
the black nut on by turning clockwise until it is hand tight.
Fig. 5 Fig. 6
ADD ENGINE OIL
The pressure washer is shipped without oil.
User must add the proper amount of oil before
operating the pressure washer for the first time.
The oil capacity of the engine crankcase is
500ml. For general use (above 40° F), we
recommend 30W, 4-stroke engine oil.
ENGINE OIL RECOMMENDATIONS
Fig. 7A
Use a semi-synthetic SAE 15W 40 engine oil.
To add oil, follow these steps : (Fig. 7B)
1 . Make sure the pressure washer is on a level surface. Do not
tilt the pressure washer to fill. Oil to flow into engine areas
and damage the machine. Keep the pressure washer level!
2 . Remove the dipstick from the engine. (Fig. 7B)
3 . To check the oil level: wipe the dipstick with a clean rag.
Insert the dipstick into the oil fill opening without screwing it
in. Remove the dipstick to check the oil mark.
4 . Add oil (not included) slowlyuntil the oil mark reaches to the
top of the dipstick. The capacity of the oil tank is 500ml. Do
not over fill the crankcase.
Check for oil leaks and clean any spilled oil. Tighten dipstick
firmly.