background image

10

Disassembly Instructions

Step 1

Unzip the connection between the Main tent 
and Ensuite tent.

Step 2 

Release awning, guy rope and Posibrace™ 
Velcro™ points that attach the fly to the poles 

and hubs. Release hooks along the base of the 

fly that attach to the Main tent. Remove side 

halo poles. Release hooks around the base of 

the Ensuite fly that attach to the steel upright 
poles. It is now safe to carefully remove both 

flys. Lay each fly flat on ground separately and 

fold fly in half, third or quarters.  The width of 

the folded fly should be the length of the pole 
bag. See Figure 11.

Step 3 

Unzip doors and windows, with the help of 

at least one other person separately collapse 

the tent and Ensuite by removing and 

disassembling the poles in the reverse order of 
the assembly instructions. Place the poles in the 
pole carry bag and tie shut.

Step 4 

Remove pegs with a claw hammer or peg puller. 

Do not remove pegs from the ground by pulling 
on tent base as this may cause damage to the 
tent.

Step 5 

Spread the tent and Ensuite out flat separately 
with all loose fabric folded within the edges of 

the tent base. Try to flatten the tents as much as 
possible.

Step 6 

Fold the tents in half, third or quarters. The 

width of the folded tent should be the length of 

the pole bag. See Figure 11.

Step 7 

Lay the folded Ensuite fly over the folded 
Ensuite tent. Beginning at the back portion of 
the Fly and inner tent bundle roll forward firmly 
allowing trapped air to escape. It may help to 
use the bag of Ensuite poles as a rolling pin 

ensuring the tent edges are kept straight as you 

roll. Repeat this step for the Main tent fly, tent 

and pole bag.

Step 8

 Once the tent bundle is rolled up, tie straps 

around it and place into tent carry bag with 

peg bag, instruction booklet and other 

miscellaneous parts. If the tent won’t fit into 

carry bag, unroll and reroll more tightly.

HELPFUL HINT
 Never store your tent damp or dirty. If you 
have no choice to return home from your 
camping trip with a damp or dirty tent, 
make sure you lay it out to air in a cool, dry 
and shaded place as soon as possible and 
only pack it away when it is completely dry 
and clean.

Содержание DTS-LODF-B





















Отзывы: