7
Assembly Instructions cont.
HELPFUL HINT
Before attempting this step it helps to open the
doors of the tent. This allows for the air to enter
into the tent as you raise it.
Step 7 Attaching the Fly
Sheet on the Main tent
With the unfolded fly sheet on the ground,
ensure that you have the front and the back
of the fly aligned correctly with the tent. With
the help of another person raise the fly sheet
up and carefully draw it up and over the top of
your tent. Do this slowly to avoid snagging the
fly and causing any damage. Once the fly sheet
is on top of your tent you can now securely
attach all of the Posibrace™ Velcro™ reinforcing
points on the underside of the fly sheet to the
corresponding poles and hubs, see Figure 7.
Figure 5
Figure 6
Figure 7
Select one of the four “black steel wall poles
with red sticker.” Insert one end into the middle
portico hub with red tape and place the
opposite end onto the ring and pin assembly at
the base of the tent floor directly below. Attach
the pole clips located on the inner tent. Repeat
this process for the remaining three “black steel
wall poles with red sticker”.
