9
Assembly Instructions cont.
Step 11 Attaching the Fly
Sheet on the Ensuite tent
Lay the fly sheet out along the side of your
tent. Ensure that you have the front and the
back aligned correctly. Raise the fly sheet
up and carefully draw it over the top of your
tent. Do this slowly to avoid snagging the fly
and causing any damage. Once the fly sheet
is on top of your tent you can now securely
attach all of the Posibrace™ Velcro™ reinforcing
points on the underside of the fly sheet to the
corresponding poles. Finally attach the corner
plastic “S” hooks on the base corners of the fly to
the “D” rings on the steel wall poles.
Step 12 Attaching the
zippered connection
between the Ensuite and
Main tent
With the help of at least one other person to
position the Ensuite tent accurately. Locate
the zippers on the connecting Main tent and
Ensuite. Zip the corresponding parts together.
Making sure to pull the zippers evenly with only
a small amount of force needed, excess force
may damage the zippers.
Step 13 Guy ropes and peg
out the Ensuite and Main tent
Anchor the Ensuite tent to the ground by
inserting the pegs through the four corner rings
around the base of the tent at an angle of 45
degrees as indicated in Figure 2, firm but not
tight.
PLEASE NOTE
In severe conditions the tent should be
dismantled
Figure 10
Ensure all guy ropes of the Main tent and
Ensuite are utilised. Make a loop (about
30 – 50cm long) with a slider on the end of
the rope and peg out as far as possible from
the tent, See Figure 10. Ensure all peg down
points are utilised and all guy ropes are
attached firmly and remain firm, see Figure 8.
