O
ZRAY
Pollux Small Series – 16M Camera
Page
13
of
40 Manual 1.2
3
Power Over Camera Link (PoCL)
The Pollux Camera Link cameras comply with “Power over Camera Link” which
enables power to be supplied to the camera through the Camera Link cables. Power
must be supplied via both Camera Link cables in order to utilize the PoCL
capabilities. If you plan to use this function, please be sure that the frame grabber
board you are using also complies with this specification. We can guarantee the
Radient frame grabber from Matrox are able to supply a sufficient power for the
camera‘s operation. Alternatively, the camera can be powered via a separate power
supply connected to the 6-pin Hirose Connector.
It is recommended to remove the power adapter from the camera power connector
when using the camera in a PoCL configuration.
3.1
Camera Link Connector
The camera uses two Mini Camera Link (MiniCL) SDR26 cables transmitting the
Camera Link Configuration.
The figure below shows the SDR26 Camera Link Connector and the tables that
follow list the Camera Link configurations.
Figure 7.
Camera Link connector
Содержание pollux PX12M64MCL
Страница 1: ......
Страница 19: ...OZRAY Pollux Small Series 16M Camera Page 19 of 40 Manual 1 2 Figure 10 Installation using PoCL ...
Страница 33: ...OZRAY Pollux Small Series 16M Camera Page 33 of 40 Manual 1 2 ...
Страница 37: ...OZRAY Pollux Small Series 16M Camera Page 37 of 40 Manual 1 2 Figure 22 Setting ROI at Pollux terminal ...