Floor Tool
The floor tool is for vacuuming
solids and liquids over medium
to large areas.
Crevice Tool
The crevice tool is designed for cleaning crevices
and edges.
Angled Nozzle
The angle nozzle can be used for vacuuming in
narrow channels and grooves or during blowing
operations.
Concentrator Nozzle
The concentrator nozzle can be used for spot
vacuuming & blowing.
4. ATTACHING HOSES & NOZZLES
Hose Outlet Selection
Connect the suction hose to the appropriate outlet on the wet and dry
vacuum, depending on the application required:
Vacuuming
Connect the hose to the vacuum
inlet and twist it clockwise to lock
it in place.
WARNING!
ALWAYS CONNECT NOISE DIFFUSER
TO THE BLOWER PORT DURING VACUUMING
OPERATION.
Extension Tubes
The suction hose can be extended by attaching one or more sections
of the extension tubes.
Alternatively, the blower unit can also be detached from the vacuum
tank to be used outdoors as a separate tool. In which case the
adaptor can be fitted to the blower port and an extension tube
connected to the other end of the adaptor for a longer blowing nozzle.
a.
b.
a.
b.
